+7 (3532) 43 91 55 info@mst56.ru
Mesh Demister

Mesh Demister

Mesh Demister (also known as eliminator, mist eliminator, mesh demister). Demister is used as the most effective element for cleaning, drying, distillation and separation of the gas in tanks and towers.         Order Wire thickness, from % Filtration Life time Filtering, from  Mesh Demister Mesh Demister (Mist eliminator) is designed for degassing oil and associated gas in devices of collection and preparation of oil field production, and in other technological devices designed for the separation of air and gas from liquids and flue gas emissions. Vapor-water operating mode. Mist eliminators are made of metal wire or plastic wire filaments with a typical wire diameter of 0.1 – 0.3 mm formed in one integral structure and then pressed or shaped to the desired diameter, depending on the diameter of the steam supply tower. Compressing or packing density may be different: in the upper part of the filter is higher, at the bottom – the less dense. Changing of the grid density is necessary for a better distribution of the liquid droplets and its better separation from the vapor fraction. Water molecules contained in the steam passing through the eliminator precipitate on the filaments of the filter due to distillation. Accumulating as they pass upwards droplets become heavier and begin to flow down by gravity, resulting clean and dry steam without water impurities in the output. Water is diverted to the recycling of the device. Under normal operating conditions eliminator efficiency reaches up to 99% with a pressure drop of less than 250 Pa. Gas separation operating mode. In many technological lines used in gas production, gas processing,...